Terminal Control Module 3 120V or 220V or 120V Lamp Control Module
 Terminal Control Module 3 120V The 3 terminal control module is general purpose control module which includes the ground pin. It can be used for switching resistive as well as inductive loads. Uses include heaters, chillers, lighting systems, pumps, and powerheads. This control module responds to only the on and off commands sent from the AquaController. Its max specifications are 500W incandescent lamp, 1/3 HP motor load, or 15A resistive load. The physical dimensions of the module are 2.3" x 2.9" x 1.4". 220V The 3 terminal control module is heavy duty 220V control module. the ground pin. It can be used for switching large 20A 220V loads. Uses include any 220V volt appliance of 20 amps or less. This control module responds to only the on and off commands sent from the AquaController. The physical dimensions of the module are 2.3" x 3.6" x 2.1". 120V Lamp Control Module The lamp control module is used to simulate the moon cycle with an incandescent bulb. This control module responds to both on, off and intensity commands sent from the AquaController. This module is can only be used with incandescent lamps of 300 watts or less. |
